Frequently Asked Questions

Find answers about compatibility, setup, shipping and warranty. Search a keyword or filter by category below.

Showing 6 of 6 answers

Product FAQs

Setup, mounting and daily use of a specific product.

How much recoil can the CVLIFE EagleFeather 4-12x50EG scope combo withstand?

Every component of the EagleFeather 4-12x50EG scope combo is shock-tested and rated to withstand at least 650G of impact acceleration, so the optic absorbs heavy recoil impulses without issue.

Pre-Sales & After-Sales

Ordering, shipping, returns and warranty.

Why do the turret clicks on my 3-9x40V feel uneven — a faint click, then a firm one?

The 3-9x40V uses a leaf-spring detent in the turret. Because this model is built with a long eye relief, the internal space around the erector is tight, so the click can feel light at some positions and firm at others. Judge adjustment by counting clicks from the mechanical stop and confirming on paper, not by the sound. If the point of impact stops following the clicks, or the turret feels loose rather than firm, contact our support team.

The side-focus knob on my 5-25x56 is extremely stiff and will not turn past about 15 yards. Is that normal?

A new side-focus knob is assembled tight on purpose, so the erector stays stable under recoil, and it can feel stiff straight out of the box. Turn it firmly by hand through its full range several times. Do not use tools or pliers. If it still will not move past a certain distance, or it jams, stop there: that is an assembly issue rather than something to force, and our support team will arrange an inspection or replacement.

Why does the side focus on my 6-24x50 FFP need readjusting after a few shots at short range?

Side-focus mechanisms carry some thread clearance, and at very short distances a small thread shift moves the focal plane enough to notice, so the image can need a slight correction after a few shots. Side focus is designed around long-range work, where the same clearance is not visible. If the focus drifts at long range, or the knob binds instead of turning smoothly, that is not normal and should go to support. For mostly short-range shooting, a model with adjustable objective is the better fit.

The mount fits my Picatinny rail but will not tighten down. What am I missing?

The mount does fit the rail — the clamp is simply not closing squarely. Do not drive one screw all the way down first. Tighten the clamp screws in rotation, a quarter turn each and going around the mount, so the clamp closes evenly on both sides. Seat the mount against a rail slot before tightening, keep the 20 MOA incline facing the correct direction, and finish at the specified torque. Uneven, one-screw-at-a-time tightening is the usual reason a mount feels like it will not tighten.

Why does my 3-9x40 lose zero after I dial up for 200 yards and then back down to 100?

This model has no parallax or focus adjustment: its optics are set at the factory for a 100-yard reference, and the turrets move the reticle, not the focal plane. Forcing the objective to a 200-yard setting and then back to 100 does not return the scope to the same optical state, so the zero reads off. Two things worth checking: shake the scope gently near your ear — a rattle means a loose internal part and is a warranty case; and count clicks from the mechanical stop so you come back to the same setting. For work at several distances, choose a model with adjustable objective or side focus.

Didn't find your answer? Ask us your question.
Our support team replies within 1 business day.
Contact us

© 2026 CVLIFE, Con tecnología de Shopify

    • American Express
    • Cartes Bancaires
    • Diners Club
    • Discover
    • JCB
    • Maestro
    • Mastercard
    • PayPal
    • Union Pay
    • Visa

    Iniciar sesión

    ¿Olvidaste tu contraseña?

    ¿Aún no tienes una cuenta?
    Crear una cuenta