Image banner

Highlight a new collection and share details about products related to this image

Column
Pair text with an icon or image to focus on services, products, blog posts or collections.
Column
Pair text with an icon or image to focus on services, products, blog posts or collections.
Column
Pair text with an icon or image to focus on services, products, blog posts or collections.
Column
Pair text with an icon or image to focus on services, products, blog posts or collections.

Zeroing and Red Dot Installation

How to zero correctly?

Note: Please read this section carefully before use!

Here are the steps to zero：
1. Secure the gun to a tripod or sandbag to ensure stability.
2. Visually adjust the red dot position to roughly align it with the barrel axis.
3. Fire the first group of shots (3–5 rounds) within 25 yards, record the center position of the impact cluster, and check for any deviation between the impact points and the aiming point.
4. Measure or estimate the lateral deviation between the center of the impact points and the center of the aiming point. Calculate the adjustment amount.
5. Measure or estimate the vertical deviation between the center of the impact point and the center of the aiming point. Calculate the adjustment amount.
6. Make adjustments based on the actual direction of deviation.
7. After making adjustments based on the actual direction, fire another 3-5 rounds to confirm that the impact points align with the red dot.
8. If there is still deviation, repeat the fine-tuning process until satisfied.